Flex Roofing Systems
2670 Leiscz's Bridge Rd.
Suite 400
Leesport, PA 19533
Phone: 800-969-0108
Fax: 610-916-9501
Detail Drawings
Elvaloy®
|
TPO
|
Modified Bitumen
|
CTR
|
ISO
Flex TPO Plus Adhered Roof Systems
Drawing Index
Flex TPO Plus Mechanically Fastened
Rood Systems
Drawing Index
Insulation Attachment Method I 1.01
Insulation Attachment 1.04
Insulation Attachment Method II 1.02
Sheet Layout 2.01
Membrane Lap Detail 2.04
EndLap Cross Section 2.02
60mil & 80mil T-Joint 2.06
Lap Cross Section 2.03
Low Profile Expansion Joint 3.01
Plate & Fastener Placement 2.05
Wall Expansion Joint 3.02
60mil or 80mil Membrane T-Joint 2.06
Pre-Formed Curb Flashing 3.05
Ridge Membrane Attachment 2.07
Parapet Curb Flashing 3.07
Low Profile Expansion Joint 3.01
Vertical Flashing Termination 3.08
Expansion Joint at Wall 3.02
Roof Drain > 3” 4.01
Curb Flashing 3.03
Roof Drain < 3” 4.02
Coated Metal Curb Flashing 3.04
Pre-Formed Pipe Boot 4.03
Parapet Flashing 3.06
Field Fabricated Pipe Flashing 4.04
Flashing Terminations 3.08
Hot Pipe Flashing 4.05
Roof Drain > 3” 4.01
Split Pipe Boot 4.06
Roof Drain < 3” 4.02
Inside Corner 5.01
Pre-Molded Pipe Flashing 4.03
Pre-Fromed Outside Corner 5.02
Field Fabricated Pipe Flashing 4.04
Field Fabricated Outside Corner 5.03
Hot Pipe Flashing 4.05
Pitch Pocket 5.04
Split Pipe Boot 4.06
Through Wall Scupper 5.05
Inside Corner Flashing 5.01
Pre-Molded Outside Corner 5.02
Pitch Pocket 5.04
Through Wall Scupper 5.05
In order to view these documents, you will need the free Adobe Acrobat Reader, version 5.0 or higher.